LAS VEGAS, NV — It is no secret that AMD's Threadripper multi-core processor is a beast goes without saying and 16c/32t of computing power is nothing short of impressive in the desktop marketplace. Going the extra mile when it comes to providing 'power' users multiple options in regards to form factors, ASRock has unveiled their new microATX TR4 socket motherboard at CES 2018 in Las Vegas, the ASRock X399M Taichi.

The ASRock X399M Taichi is the worlds first AMD Threadripper supported motherboard and allows users to run a microATX system with AMD's EPYC based Threadripper processors including the AMD Ryzen Threadripper 1920X ($799) and 1950X ($999).

The details regarding the X399M Taichi are vague at best, but what we do know is the board is stacked with an eleven power phase DR.MOS design, three full length PCIe 3.0 x16 slots in addition to three ultra fast PCIe 3.0 x4 M.2 slots; in addition to these, the X399M Taichi features a single U.2 connector. Also included is a duo of Gigabit Ethernet ports including Wi-Fi capability, as well as carrying four RAM slots due to the reduction in size thanks to the smaller form factor.

Pricing is expected to be a little higher than ATX version, the ASRock X399 Taichi which retails for $339.

Related Reading:

Source: ASRock

Comments Locked


View All Comments

  • JoeyJoJo123 - Tuesday, January 9, 2018 - link

    I quit my job and I make 90 memebucks an hour over the internet. How? Just click this fishy link!
  • shabby - Tuesday, January 9, 2018 - link

    Where the link?!?
  • PeachNCream - Tuesday, January 9, 2018 - link

    If you click normal text hard enough, it turns into a hyperlink so just keep mashing the left button as aggressively as possible and you'll get there!
  • fabarati - Tuesday, January 9, 2018 - link

    Instructions unclear, now stuck on the roof.
  • aebiv - Tuesday, January 9, 2018 - link

    I literally LOL'd.
  • Lord of the Bored - Wednesday, January 10, 2018 - link

    Me too.
  • fazalmajid - Tuesday, January 9, 2018 - link

    The 4 DRAM slots limitation is unfortunate. I'd love to upgrade my SFF Xeon software development workstation (no fancy graphics required) to a threadripper (specially after Meltdown) but being limited to 64GB RAM is a bummer.
  • Cooe - Tuesday, January 9, 2018 - link

    Technically, that's actually not true at all, as Threadripper has full support for high & ultra-high capacity DIMM's (supports up to 128GB in each DIMM slot). 32GB DIMM's won't be at all cheap, or come in crazy high clocks (2666MHz is likely the best you'd get for the stock clocks, so 2800 when OC'd with extra voltage should be possible, but nothing crazy by any means; dual-rank sticks are hard enough to push far with 1st gen Zen, so quad-rank high capacity DIMM's are likely to be even harder (and I dunno if 32GB DR sticks exist yet), but fitting 128GB in that board is totally doable with today's tech.

    With tomorrow's tech though (unless you are willing to pay $30,000 per 128GB 8-rank (iirc) DIMM, as they literally only JUST came out), that board will fit up to 1/2TB of DDR4 with multi-rank high capacity sticks. Threadripper's support for all that >dual-rank high capacity server RAM (and thus ECC as well of course), is one of those totally awesome, super future proof things about the basic design coming near straight from a server chip (EPYC).
  • enoch861 - Wednesday, January 10, 2018 - link

    Doesn't the motherboard technically have to support the higher RAM size? I can't imagine you can go out and buy a 128GB DDR4 stick and have it work with no issues.
  • tubawest - Friday, January 12, 2018 - link

    Yes, but asrock has a history of supporting such things on their high end platforms. I know for their X99 ITX board, there was a guy who ran 256gb of ddr4 using its paltry 2 dimms! (yes it can be finicky, but will work more than likely if you research and enthusiats are willing to do, though I suppose not recommended for those who just need it to work without hassle)

Log in

Don't have an account? Sign up now